Quantcast
Channel: Remote Desktop Services (Terminal Services) forum
Viewing all 27765 articles
Browse latest View live
↧

Deployment overview is set to "Per User", but Licencing Diagnoser says the server is in "Per Device" mode.

May 5, 2019, 2:30 pm
$
0
0

I'm in the midst of setting up a Server 2016 RDS deployment and as far as I can tell I have everything right, but I'm having a licencing issue. 

For now, until I know everything is set up correctly I have just 5 "per user" CALs installed. They installed without any errors. 

In the Deployment Properties the RD Licensing was set to "Per User". The licensing server listed is the correct one, and the 'per user' cals are installed on the correct server. 

However, when I run the "Licencing Diagnoser", it says that the server is in "Per Device" mode. 

Reinstalling the licences has not helped. I'm not sure what to do, I'd hate to have to re-do the whole deployment. 

↧
Search

I VPN to a website's server menu via CITRIX which has a RDP ICON, it works most of the time, but sometimes when I click

April 30, 2019, 10:08 pm
$
0
0
on the RDP icon, when the launch ica brings up the Citrix popup window, it does a Welcome & disappears.  Usually, the Citrix popup window will have Welcome, and a bunch of messages, then preparing desktop msg & the RDP window pops up to enter the IP address to my remote computer. I try many times with the same results...then sometimes it goes all the way to the RDP popup. What could cause this intermittent problem? There are other application ICONs that also launch ICA successfully like EXTRA Tn3270on their menu. Only the RDP does this. And then the next day, it is fine.
↧
↧

Remote Desktop Services - Windows 2016 - Printer Redirection Stops Working

April 30, 2019, 5:35 am
$
0
0
We have setup many Remote Desktop Services and Users who connect get their local printers redirected. Recently on a Windows 2016 Standard Remote Desktop Server Users find that after some days of working fine they login and no redirected printers are available. If we log into the Remote Desktop Server our printers are not redirected either. The only way we seem to be able to resolve the redirection is to restart the Remote Desktop Server. This is a pain because it is constantly in use until late in the day. Have never had this issue before on Windows 2012 R2 or previous Windows versions. Can anyone find a solution to stop this from happening?
↧

RDS ISAPI Filters

April 30, 2019, 3:56 am
$
0
0

Hi,

I tried to install .net 1.1 on our Server 2016 RDP server, however it mucked up the ISAPI filters on IIS, so it was not working.

I have removed the one with the extra \ in it and recreated the default x86 and x84 ones, how do I know they are working though, and are they even used for our Remote Desktop Gateway?

Everything seems to be up and running by the way.

↧

Certificate issue: the remote computer cannot be authenticated due to problems with its security certificate. " Error code - 0x80072f8f, 0x20

April 29, 2019, 7:52 am
$
0
0

Hello Team,

I have the below issue:

Here is my RDS environment:

I have only one server 2012 R2 standard with the below roles installed 

  • RD connection broker,
  • RDSH,
  • RD Licensing and
  • RD web access

I have published few remote apps and I was able to access them using RD web feed till yesterday. 

Example : https://contoso.com/RDWeb/Feed/webfeed.aspx

I do have installed the SSL certificate on my server and provided the same to RD web. 

But today while I use the same url to access the remote apps I get the below error message 

"The remote computer cannot be authenticated due to problems with its security certificate. security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer"

Error code - 0x80072f8f,0x20

Now I can only access the remote apps through RD web access ( https://FQDN/RDWeb)

Please help me in fixing this issue. 

Any help would be much appreciated.

Thanks

SM

↧
↧

RDS 2012R2 Issue

April 29, 2019, 6:55 am
$
0
0

1.We have installed RDS (RDCB, RDSH, RDWeb) on one host. RDS service is working well without any errors. But if we open Server Manager->RDS we're getting "A Remote Desktop Services deployment does not exist in the server pool.
To create a deployment, run the Add Roles and Features Wizard and select the Remote Desktop Services installation option."

2. We get the same error after Get-RDServer - "The RD Connection Broker server is not available"

3. If we add Roles-> RDS Installation, the next error - "could not retrieve the deployment information from the rd connection broker"

4. If we add this server to Server Manager on another host we receive - "Kerberos Security Issue". All hosts was added to Trusted.

All RDS services are running (including WID). ServerManager and Posh running by Administrator.

How to resolve it?

↧

RDS with Azure Load Balancing

April 28, 2019, 5:12 pm
$
0
0

Hi Folks,

I was testing out the solution provided by MS in one artciles to configure RDGW/WEb access server behind Azure LB but was confused with step3.https://docs.microsoft.com/en-us/windows-server/remote/remote-desktop-services/rds-rdweb-gateway-ha


Scenario: RDS GW/Web Access in HA running behind a Standard Azure Public Load balancer..The solution works good  but If i start restricting the traffic via NSG...the only way rd Gateway/WI URL works publicly  is if i put the 
source :Internet;destination : IPs of my RDS GW/WebAccess Servers; port :443... 

Ideally,shouldn't it be working if i enable the port 443 from outside network to the IP of Public Load balancer (behind which actually are my RD GW/Web Access servers)or Am i doing something wrong?...
If it works by allowing port 443 to internal IP of RD GW/Web Access server ,isnt it a  secrutiy risk?
Please let me know if somebody can help out to clear the confusion

ManeeshB

↧

Connection Broker tries to login to RD Host with computer account? EventID 4625

April 26, 2019, 2:20 am
$
0
0

Hello!

We have two Connection Broker servers using DNS round robin. Yesterday i saw that our RD host servers have alot of Audit Failure events (4625) in the Security log.

It looks like our CB servers are trying to logon with it's computer account to the RD Host. This happend multiple times per day and when it does it's looks like it's spamming login attempts, up to 10 times per second. Please take a look at the following look example:

Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2019-04-26 10:25:40
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      CB01.domain.net
Description:
An account failed to log on.

Subject:
Security ID: NULL SID
Account Name: -
Account Domain:-
Logon ID: 0x0

Logon Type:3

Account For Which Logon Failed:
Security ID: NULL SID
Account Name: CB01
Account Domain:DOMAINNAME

Failure Information:
Failure Reason:Unknown user name or bad password.
Status: 0xC000006D
Sub Status: 0xC0000064

Process Information:
Caller Process ID:0x0
Caller Process Name:-

Network Information:
Workstation Name:CB01
Source Network Address:172.21.XX.XX
Source Port: 52891

Detailed Authentication Information:
Logon Process:NtLmSsp 
Authentication Package:NTLM
Transited Services:-
Package Name (NTLM only):-
Key Length: 0

Any suggestions?

Kind Regards,

Anthon

↧
Search

Remote Desktop session establish problem

April 26, 2019, 12:12 am
$
0
0

Dear concern,

I am using 200 RDS Device CALs. I am using 2 RDS server in workgroup environment. I installed RDS host and licensing role in my one server and installed 200 RDS CALs in this server. Also installed RDS host role in another server and map of the first one server as it's licensing server via local policy. Users randomly connect to these two server via Remote Desktop. Licensing server shown the 200 device CAL in console but when user connect to RDS server via thin client (non Microsoft endpoint) they can establish connection only for one hour and got a warning message"There is a problem with your license for Remote Desktop and the session will end in 60 minutes. Contact your system administrator to resolve this issue"then user forcibly disconnected. I had seen two things that RDS server didn't assign temporary license for thin client user and RDS license not count down, it fixed on 200.

Please response me ASAP.

Thanks,

Babu

Babu

↧
↧

Publish custom rdp on rdweb

April 24, 2019, 12:24 am
$
0
0

Hey

Is it possible to publish a cutom rdp on the rdweb? (for another company/connection broker)

Mike

↧

NPS Azure MFA working for RDWeb but not RDC

April 23, 2019, 7:49 am
$
0
0

Single RDS gateway 2016.  Both RDweb and RDC point to same Gateway. We have NPS extention configured. 

When we login on to RDweb we get the MFA prompt from Ms Auth

When we log on to the same GW via RDC the logon never gets to NPS for MFA. 

I am trying to ID the issue. RDweb is aware and looks to the NPS CAP store. But RDC seem oblivious. How do these two authenticate differently? Any ideas on how to troubleshoot to ID and resolve? 

I have even remove NPS completely and rebuilt but same issue. So I am convinced the issue is w. RDC/RDGW and not the NPS/MFA side of things. 

Thanks,

SJMP

↧

Office 365 Activation prompts on Server 2016 RDS Host

May 1, 2019, 3:31 pm
$
0
0

Platform

  • Server 2016 Session Host
  • Office 365 Pro Plus 2016

Hello

We successfully installed Office 2016 Prop Plus on to the session host some months ago. We have a random problem that has occurred twice now, where a user is prompted toactivate the product when they open a document first thing in the morning. The user can successfully activate the product by signing in. But if they close all products, they are promoted to  activate again when opening any of the products. The only way I could fix this for the first user a few months ago was to delete the profile  including the UPD.  The issue has begun again for anther user, and I'm trying to find a solution. There are other people having this issue out there in tech land, but with no firm answers that I can find. 

Many Thanks 

MIS5000

↧

Is it possible to change default rdp file for a specific published app on Remote Desktop Server 2016

May 2, 2019, 5:01 am
$
0
0

Hey everyone,

I have a Remote Desktop 2016 Farm running published apps

The Windows 10 Clients inherit the dpi settings from the local computer to the published app that they execute, but that function does not work with Windows 7.

I know it is possible to change the default dpi and resolution settings from “rdweb\pages\Application Settings” for all published applications.

Does anyone know if it is possible to change screen or dpi resolution for a single published app?

Best regards
Carsten

↧
↧

RDSH Farm on Windows Server 2019 but Windows 7 users are not able to connect to RDSH 2019 farm

May 3, 2019, 3:36 am
$
0
0

Hello Friends, 

i have deployed new RDSH 2019 farm with 2019 RD Web , Gateway & Broker server farm in my local infrastructure. we have couple of user who are still on Windows 7 SP1, but when they try to access  new 2019 RDSH farm they are not able to access with warning as below.

[Window Title]
Remote Desktop Connection

[Content]
Your computer can't connect to the remote computer because an error occurred on the remote computer that you want to connect to. Contact your network administrator for assistance.

[OK] [Help]

my Windwos 7 computer is fully updated and  i have also applied  RDS version 8.1 to my windows 7 computer. still no luck, let me know if any one else is facing simile issue.  

Thank you, 

@mar




↧

Win server 2016 Reboots everyday @ 9

May 3, 2019, 5:02 am
$
0
0

Hi guys i was wondering if you could help me out with a reboot issue.

I have a windows Server 2016 terminal server installed in my test environment with an activated license but the server keeps getting rebooted and i did not configure it.  Any idea what this could be?

I already checked if it was a Windows update issues but it does not seem to be.

I get the following error message:

The process C:\Windows\System32\svchost.exe (C6) has initiated the restart of computer C6 on behalf of user NT AUTHORITY\SYSTEM for the following reason: Other (Unplanned)
 Reason Code: 0x0
 Shutdown Type: restart
 Comment: A remote client is trying to shutdown this machine through Remote Desktop Services

Event id: 1074

User: System

↧
Search

batch file issue

May 3, 2019, 6:09 am
$
0
0

Hey

I have a few creative studens, who bypassed the blocking of cmd, and created some batch file.

One of them give the access to whole path c:/ trough the file explore .with this command:  start %windir%\explorer.exe "C:\"

Im running some batch files my self for all the users, so i wont block for batch file running. 

How do I stop or block for these creative studens. :-(

King Regards
Jerry


↧

Event ID 20499 "Remote Desktop Services has taken too long to load the user configuration from server"

May 6, 2019, 12:04 am
$
0
0

Hi,

My Remote Desktop Services which is running on windows server 2012 r2 i am getting Warning Message of

"Remote Desktop Services has taken too long to load the user configuration from server" Please help on same.

Thanks

CI

↧
↧

RDS 2012 R2 and corrupt user profile disks (UPD)

February 24, 2015, 3:01 am
$
0
0

Hi!

I have a setup with two RDS 2012 R2 servers and one 2012 R2 server with a share for User Profile Disks.

It's normally running fine but sometimes some profiles gets corrupted and it's a mess to clean up. Also the old profile disk is useless which is strange.

I remove the profiles from the local RDS server (c:\users\username) and also from registry. But I have to also delete existing profile disk, it won't load again. That's a problem as I then have to spend time restoring data from the profile (I have to mount it and copy data).

Does anyone know of a fix ? It's a very time consuming and annoying problem......

↧

RDS Licensing Questions

May 1, 2019, 1:20 pm
$
0
0

OS in question Server 2016 and Server 2019

If we have a 2019 Remote Desktop Server and it has 20 RDS User Client Access Licenses. All 20 users have logged in at some point and consumed a License. Then a 21st person logs in.   What Happens?  

Do the old users eventually still drop off if they have not connected?

Is there a Manual way to Assign/deassign a License to a user?

↧

Terminal Services Licensing Errors Windows Server 2012 R2

May 3, 2019, 8:01 am
$
0
0

Can you offer up some suggestions regarding the following System log events? We are seeing these errors frequently on the Windows Server 2012 R2 server which is hosting the Remote Desktop license server.

1. Are these warnings and errors concerning and require action to correct? If so what steps?

2. What end user experience symptoms (other than the posted messages to System log) would we expect to see?

Log Name:      System
Source:        Microsoft-Windows-TerminalServices-Licensing
Date:          4/29/2019 11:12:28 AM
Event ID:      4105
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      MSRDSLIC.mydomain.com
Description:
The Remote Desktop license server cannot update the license attributes for user "useraccountname" in the Active Directory Domain "mydomain.com". Ensure that the computer account for the license server is a member of Terminal Server License Servers group in Active Directory domain "mydomain.com".
If the license server is installed on a domain controller, the Network Service account also needs to be a member of the Terminal Server License Servers group.
If the license server is installed on a domain controller, after you have added the appropriate accounts to the Terminal Server License Servers group, you must restart the Remote Desktop Licensing service to track or report the usage of RDS Per User CALs.
Win32 error code: 0x80070005
Log Name:      System
Source:        Microsoft-Windows-TerminalServices-Licensing
Date:          4/30/2019 5:51:17 AM
Event ID:      44
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MSRDSLIC.mydomain.com
Description:
The following general database error has occurred: "ESE error -1003 JET_errInvalidParameter, Invalid API parameter."
Log Name:      System
Source:        Microsoft-Windows-TerminalServices-Licensing
Date:          5/1/2019 11:46:41 AM
Event ID:      4106
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      MSRDSLIC.mydomain.com
Description:
CAL reporting: Windows Server 2012 : RDS Per User CAL - Installed: 850, Issued: 881

In addition, I can confirm that, per instructions in event 4105, the license server is not a domain controller and the computer account is a member of the built-in "Terminal Server License Servers" group.

A similar question TechNetForumTopic, TechNetForumQuestion, SysAdminTipBlog, and MsITprosBlog refers to a solution involving old accounts for long-term employees who are appearing in event 4105. I have validated that many of them are old enough that they likely existed back when this domain was at the 2003 functional level (it is now at the 2012 level). However, these users are not reporting any symptoms, so the event 4105 seems to not cause any downside other than logging the event. (Which goes back to my original questions, what symptom effect should we be seeing?)

Thanks in advance for your assistance.


↧
Viewing all 27765 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>